点击图片查看大图
电机+直角(中空轴/中实轴)齿轮减速马达 马力：25W、40W、60W、90W、120W、150W 、200W、400W、750W、1500W、2200W
电压：单相 110V~220V
三相 220V~380V
*分为RA型和中空轴RH型（中空轴孔内有15#和17#两种） * 输出轴与电机部分成90°直角，故可用于被动轴部分垂直设置电机，进一步可减省安装空间。
* 具有相当停止保持力。
* 可任选调配任何马达。
1、小体积，传动效率高；
2、大扭矩，齿轮模数大；
3、低噪音且免维护；
4、高速比，单箱体可实现多段速，速比可达1/5~1/240，扭力大；
5、安装方便，不需要链条、链轮及防护罩，直接联接，方便又节省成本；
6、机种全，25W~2200W，可配刹车及智能控制。
电 压：220V-380V(其他特殊规格需定做)
●直角减速箱分为中空轴RC型和中实轴RT型。
（中空轴孔内径有￠15、￠17、￠22三种,中实轴轴径有￠15和￠20两种）.
●直角减速箱采用格雷森弧齿结构，传递扭矩大，承载能力为普通减速箱的2-3倍，坚固耐用。
●直角减速机的特点：输出轴与电机部分成90°直角,故可用于被动轴部分垂直设置电机,
Motor + right angle (hollow shaft / solid shaft gear motor horsepower): 25W, 40W,60W, 90W, 120W, 150W, 200W, 400W, 750W, 1500W, 2200W
The single-phase voltage: 110V~220V
Three phase 220V~380V
* divided into type RA and type RH (hollow shaft hollow shaft hole 15# and 17# two) * output shaft and the motor part into a 90 degree angle, it can be used in the passive shaft vertically arranged motor, can further reduce the installation space.
* has a stop retaining force.
* can be chosen with any motor.
1, small volume, high transmission efficiency;
2, big torque, big modulus gear;
3, low noise and free of maintenance;
4, speed ratio, the single box can realize multi speed, speed of up to 1/5~1/240,torque;
5, convenient installation, does not need a chain, sprocket and protective cover,direct connection, convenient and cost saving;
6, model, 25W~2200W, equipped with brakes and intelligent control.
Voltage: 220V-380V (other special need to custom specifications)
The right angle gear box is divided into hollow shaft solid shaft type RC and type RT.
(hollow shaft diameter is 15 - 17, - 22, - three, solid shaft diameter is 15 - 20 and- two)
The Grayson arc tooth structure, right angle gearbox, transmission torque,carrying capacity is 2-3 times that of ordinary gear box, sturdy and durable.
Characteristics: ● angle reducer output shaft into a 90 degree angle and motorparts, so it can be used in the passive shaft vertically arranged motor,
